Standard number:
part of exactly
Standard title:
part of exactly anywhere in title
Replaces:
part of exactly
Introduce:
part of exactly
ICS:
results per page  10 20 50 100 all

All data concerning Polish Standards is taken from databaseIntegrated Information Systemand is published with one-day delay.

Found: 193

1. PN-EN 285:2000 - REPLACED BY PN-EN 285:2006
   Sterilization - Steam sterilizers - Large sterilizers

   Expiry date: 2008-11-30

   Introduce: EN 285:1996/AC:1998 [IDT], EN 285:1996 [IDT]

2. PN-EN 285:2006 - REPLACED BY PN-EN 285+A1:2008
   Sterilization - Steam sterilizers - Large sterilizers (oryg.)

   Introduce: EN 285:2006 [IDT]

   Replaces: PN-EN 285:2000

3. PN-EN 285+A1:2008 - REPLACED BY PN-EN 285+A1:2009
   Sterilization - Steam sterilizers - Large sterilizers (oryg.)

   Introduce: EN 285:2006+A1:2008 [IDT]

   Replaces: PN-EN 285:2006

4. PN-EN 285+A1:2009 - REPLACED BY PN-EN 285+A2:2009
   Sterilization - Steam sterilizers - Large sterilizers

   Expiry date: 2010-03-31

   Introduce: EN 285:2006+A1:2008 [IDT]

   Replaces: PN-EN 285+A1:2008

5. PN-EN 285+A2:2009
   Sterilization - Steam sterilizers - Large sterilizers (oryg.)

   Introduce: EN 285:2006+A2:2009 [IDT]

   Replaces: PN-EN 285+A1:2009

6. PN-EN 550:1999 - REPLACED BY PN-EN 550:2002
   Sterilization of medical devices - Validation and routine control of ethylene oxide sterilization

   Introduce: EN 550:1994 [IDT]

7. PN-EN 550:2002 - REPLACED BY PN-EN ISO 11135-1:2007
   Sterilization of medical devices - Validation and routine control of ethylene oxide sterilization

   Introduce: EN 550:1994 [IDT]

   Replaces: PN-EN 550:1999

8. PN-EN 552:1999 - REPLACED BY PN-EN ISO 11137-1:2006, PN-EN ISO 11137-3:2006, PN-EN ISO 11137-2:2006
   Sterilization of medical devices - Validation and routine control of sterilization by irradiation

   Introduce: EN 552:1994 [IDT]

9. PN-EN 552:1999/A1:2000 - REPLACED BY PN-EN ISO 11137-1:2006, PN-EN ISO 11137-3:2006, PN-EN ISO 11137-2:2006
   Sterilization of medical devices - Validation and routine control of sterilization by irradiation

   Introduce: EN 552:1994/A1:1999 [IDT]

10. PN-EN 552:1999/A2:2002 - REPLACED BY PN-EN ISO 11137-1:2006, PN-EN ISO 11137-3:2006, PN-EN ISO 11137-2:2006
    Sterilization of medical devices - Validation and routine control of sterilization by irradiation

    Introduce: EN 552:1994/A2:2000 [IDT]

11. PN-EN 552:1999/Ap1:2001 - REPLACED BY PN-EN ISO 11137-1:2006, PN-EN ISO 11137-3:2006, PN-EN ISO 11137-2:2006
    Sterilization of medical devices - Validation and routine control of sterilization by irradiation
12. PN-EN 554:1999 - REPLACED BY PN-EN ISO 17665-1:2007
    Sterilization of medical devices - Validation and routine control of sterilization by moist heat

    Introduce: EN 554:1994 [IDT]

13. PN-EN 556:1999 - REPLACED BY PN-EN 556-1:2002
    Sterilization of medical devices - Requirements for terminally-sterilized medical devices to be labelled Sterile

    Introduce: EN 556+A1:1998 [IDT]

14. PN-EN 556-1:2002
    Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 1: Requirements for terminally sterilized medical devices

    Introduce: EN 556-1:2001 [IDT]

    Replaces: PN-EN 556-1:2002

15. PN-EN 556-1:2002 - REPLACED BY PN-EN 556-1:2002
    Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 1: Requirements for terminally sterilized medical devices (oryg.)

    Introduce: EN 556-1:2001 [IDT]

    Replaces: PN-EN 556:1999

16. PN-EN 556-1:2002/Ap1:2003
    Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 1: Requirements for terminally sterilized medical devices
17. PN-EN 556-2:2004 - REPLACED BY PN-EN 556-2:2005
    Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 2: Requirements for aseptically processed medical devices (oryg.)

    Introduce: EN 556-2:2003 [IDT]

18. PN-EN 556-2:2005
    Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 2: Requirements for aseptically processed medical devices

    Introduce: EN 556-2:2003 [IDT]

    Replaces: PN-EN 556-2:2004

19. PN-EN 866-1:2000 - REPLACED BY PN-EN ISO 11138-1:2006
    Biological systems for testing sterilizers and sterilization processes - Part 1: General requirements

    Introduce: EN 866-1:1997 [IDT]

20. PN-EN 866-2:2000 - REPLACED BY PN-EN ISO 11138-2:2006
    Biological systems for testing sterilizers and sterilization processes - Part 2: Particular systems for use in ethylene oxide sterilizers

    Introduce: EN 866-2:1997/AC:1998 [IDT], EN 866-2:1997 [IDT]

21. PN-EN 866-3:2000 - REPLACED BY PN-EN ISO 11138-3:2006
    Biological systems for testing sterilizers and sterilization processes - Part 3: Particular systems for use in moist heat sterilizers

    Introduce: EN 866-3:1997 [IDT]

22. PN-EN 866-4:2002 - WITHDRAW DOCUMENT WITHOUT REPLACEMENT
    Biological systems for testing sterilizers and sterilization processes - Part 4: Particular systems for use in irradiation sterilizers

    Introduce: EN 866-4:1999 [IDT]

23. PN-EN 866-5:2002 - REPLACED BY PN-EN ISO 11138-5:2006
    Biological systems for testing sterilizers and sterilization processes - Part 5: Particular systems for use in low temperature steam and formaldehyde sterilizers

    Introduce: EN 866-5:1999 [IDT]

24. PN-EN 866-6:2002 - REPLACED BY PN-EN ISO 11138-4:2006
    Biological systems for testing sterilizers and sterilization processes - Part 6: Particular systems for use in dry heat sterilizers

    Introduce: EN 866-6:1999 [IDT]

25. PN-EN 866-7:2002 - REPLACED BY PN-EN ISO 11138-3:2006
    Biological systems for testing sterilizers and sterilization processes - Part 7: Particular requirements for self-contained biological indicator systems for use in moist heat sterilizers

    Introduce: EN 866-7:1999 [IDT]

    Replaces: PN-EN 866-7:2002

26. PN-EN 866-7:2002 - REPLACED BY PN-EN 866-7:2002
    Biological systems for testing sterilizers and sterilization processes - Part 7: Particular requirements for self-contained biological indicator systems for use in moist heat sterilizers (oryg.)

    Introduce: EN 866-7:1999 [IDT]

27. PN-EN 866-8:2002 - REPLACED BY PN-EN ISO 11138-2:2006
    Biological systems for testing sterilizers and sterilization processes - Part 8: Particular requirements for self-contained biological indicator systems for use in ethylene oxide sterilizers

    Introduce: EN 866-8:1999 [IDT]

    Replaces: PN-EN 866-8:2002

28. PN-EN 866-8:2002 - REPLACED BY PN-EN 866-8:2002
    Biological systems for testing sterilizers and sterilization processes - Part 8: Particular requirements for self-contained biological indicator systems for use in ethylene oxide sterilizers (oryg.)

    Introduce: EN 866-8:1999 [IDT]

29. PN-EN 867-1:2001 - REPLACED BY PN-EN ISO 11140-1:2006
    Non-biological systems for use in sterilizers - Part 1: General requirements

    Introduce: EN 867-1:1997 [IDT]

30. PN-EN 867-2:2001 - REPLACED BY PN-EN ISO 11140-1:2006
    Non-biological systems for use in sterilizers - Part 2: Process indicators (Class A)

    Introduce: EN 867-2:1997 [IDT]

31. PN-EN 867-3:2001 - REPLACED BY PN-EN ISO 11140-3:2007
    Non-biological systems for use in sterilizers - Part 3: Specification for Class B indicators for use in the Bowie and Dick test

    Introduce: EN 867-3:1997/AC:1998 [IDT], EN 867-3:1997 [IDT]

32. PN-EN 867-4:2003 - REPLACED BY PN-EN ISO 11140-4:2007
    Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration

    Introduce: EN 867-4:2000 [IDT]

33. PN-EN 867-5:2002 - REPLACED BY PN-EN 867-5:2003
    Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S (oryg.)

    Introduce: EN 867-5:2001 [IDT]

34. PN-EN 867-5:2003
    Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S

    Introduce: EN 867-5:2001 [IDT]

    Replaces: PN-EN 867-5:2002

35. PN-EN 868-1:1999 - REPLACED BY PN-EN ISO 11607-1:2006
    Packaging materials and systems for medical devices which are to be sterilized - Part 1: General requirements and test methods

    Introduce: EN 868-1:1997 [IDT]

36. PN-EN 868-2:2001 - REPLACED BY PN-EN 868-2:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 2: Sterilization wrap - Requirements and test methods

    Introduce: EN 868-2:1999 [IDT]

37. PN-EN 868-2:2009
    Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods (oryg.)

    Introduce: EN 868-2:2009 [IDT]

    Replaces: PN-EN 868-2:2001

38. PN-EN 868-3:2001 - REPLACED BY PN-EN 868-3:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods

    Introduce: EN 868-3:1999 [IDT]

39. PN-EN 868-3:2009
    Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods (oryg.)

    Introduce: EN 868-3:2009 [IDT]

    Replaces: PN-EN 868-3:2001

40. PN-EN 868-4:2002 - REPLACED BY PN-EN 868-4:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 4: Paper bags - Requirements and test methods

    Introduce: EN 868-4:1999 [IDT]

41. PN-EN 868-4:2009
    Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods (oryg.)

    Introduce: EN 868-4:2009 [IDT]

    Replaces: PN-EN 868-4:2002

42. PN-EN 868-5:2001 - REPLACED BY PN-EN 868-5:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods

    Introduce: EN 868-5:1999 [IDT]

43. PN-EN 868-5:2009
    Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods (oryg.)

    Introduce: EN 868-5:2009 [IDT]

    Replaces: PN-EN 868-5:2001, PN-EN 868-5:2001/AC:2002

44. PN-EN 868-5:2001/AC:2002 - REPLACED BY PN-EN 868-5:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods - Amendement AC

    Introduce: EN 868-5:1999/AC:2001 [IDT]

45. PN-EN 868-6:2002 - REPLACED BY PN-EN 868-6:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 6: Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods

    Introduce: EN 868-6:1999 [IDT]

46. PN-EN 868-6:2009
    Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods (oryg.)

    Introduce: EN 868-6:2009 [IDT]

    Replaces: PN-EN 868-6:2002

47. PN-EN 868-7:2002 - REPLACED BY PN-EN 868-7:2002
    Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods (oryg.)

    Introduce: EN 868-7:1999 [IDT]

48. PN-EN 868-7:2002 - REPLACED BY PN-EN 868-7:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation - Requirements and test methods

    Introduce: EN 868-7:1999 [IDT]

    Replaces: PN-EN 868-7:2002

49. PN-EN 868-7:2009
    Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods (oryg.)

    Introduce: EN 868-7:2009 [IDT]

    Replaces: PN-EN 868-7:2002

50. PN-EN 868-8:2002 - REPLACED BY PN-EN 868-8:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods

    Introduce: EN 868-8:1999 [IDT]

    Replaces: PN-EN 868-8:2002

51. PN-EN 868-8:2002 - REPLACED BY PN-EN 868-8:2002
    Packaging materials and systems for medical devices which are to be sterilized - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods (oryg.)

    Introduce: EN 868-8:1999 [IDT]

52. PN-EN 868-8:2009
    Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods (oryg.)

    Introduce: EN 868-8:2009 [IDT]

    Replaces: PN-EN 868-8:2002

53. PN-EN 868-9:2002 - REPLACED BY PN-EN 868-9:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods

    Introduce: EN 868-9:2000 [IDT]

54. PN-EN 868-9:2009
    Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods (oryg.)

    Introduce: EN 868-9:2009 [IDT]

    Replaces: PN-EN 868-9:2002

55. PN-EN 868-10:2002 - REPLACED BY PN-EN 868-10:2009
    Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids - Requirements and test methods

    Introduce: EN 868-10:2000 [IDT]

56. PN-EN 868-10:2009
    Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods (oryg.)

    Introduce: EN 868-10:2009 [IDT]

    Replaces: PN-EN 868-10:2002

57. PN-EN 1040:2000 - REPLACED BY PN-EN 1040:2006
    Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1)

    Introduce: EN 1040:1997 [IDT]

58. PN-EN 1040:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) (oryg.)

    Introduce: EN 1040:2005 [IDT]

    Replaces: PN-EN 1040:2000

59. PN-EN 1174-1:1999 - REPLACED BY PN-EN ISO 11737-1:2006
    Sterilization of medical devices - Estimation of the population of micro-organisms on product - Part 1: Requirements

    Introduce: EN 1174-1:1996 [IDT]

60. PN-EN 1174-2:1999 - REPLACED BY PN-EN ISO 11737-1:2006
    Sterilization of medical devices - Estimation of the population of micro-organisms on product - Part 2: Guidance

    Introduce: EN 1174-2:1996 [IDT]

61. PN-EN 1174-3:1999 - REPLACED BY PN-EN ISO 11737-1:2006
    Sterilization of medical devices - Estimation of the population of micro-organisms on product - Part 3: Guide to the methods for validation of microbiological techniques

    Introduce: EN 1174-3:1996 [IDT]

62. PN-EN 1275:2000 - REPLACED BY PN-EN 1275:2006
    Chemical disinfectants and antiseptics - Basic fungicidal activity - Test method and requirements (Phase 1)

    Introduce: EN 1275:1997 [IDT]

63. PN-EN 1275:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) (oryg.)

    Introduce: EN 1275:2005 [IDT]

    Replaces: PN-EN 1275:2000

64. PN-EN 1276:2000 - REPLACED BY PN-EN 1276:2010
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, step 1)

    Introduce: EN 1276:1997 [IDT]

65. PN-EN 1276:2000/Ap1:2001 - REPLACED BY PN-EN 1276:2010
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, step 1)
66. PN-EN 1422:2001 - REPLACED BY PN-EN 1422+A1:2009
    Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods

    Expiry date: 2010-03-31

    Introduce: EN 1422:1997 [IDT]

67. PN-EN 1422+A1:2009
    Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods (oryg.)

    Introduce: EN 1422:1997+A1:2009 [IDT]

    Replaces: PN-EN 1422:2001, PN-EN 1422:2001/AC:2002

68. PN-EN 1422:2001/AC:2002 - REPLACED BY PN-EN 1422+A1:2009
    Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods

    Expiry date: 2010-03-31

    Introduce: EN 1422:1997/AC:2002 [IDT]

69. PN-EN 1499:2000
    Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2)

    Introduce: EN 1499:1997 [IDT]

70. PN-EN 1499:2000/Ap1:2001
    Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2)
71. PN-EN 1500:2002
    Chemical disinfectants and antiseptics - Hygienic handrub - Test method and requirements (phase 2/step 2)

    Introduce: EN 1500:1997 [IDT]

72. PN-EN 1657:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) (oryg.)

    Introduce: EN 1657:2005 [IDT]

    Replaces: PN-EN 1657:2001

73. PN-EN 1657:2006/AC:2007
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) (oryg.)

    Introduce: EN 1657:2005/AC:2007 [IDT]

74. PN-EN 12353:2002 - REPLACED BY PN-EN 12353:2002
    Chemical disinfectants and antiseptics - Preservation of microbial strains used for the determination of bactericidal and fungicidal activity (oryg.)

    Introduce: EN 12353:1999 [IDT]

75. PN-EN 12353:2002 - REPLACED BY PN-EN 12353:2006
    Chemical disinfectants and antiseptics - Preservation of microbial strains used for the determination of bactericidal and fungicidal activity

    Introduce: EN 12353:1999 [IDT]

    Replaces: PN-EN 12353:2002

76. PN-EN 12353:2006
    Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal, sporicidal and fungicidal activity (oryg.)

    Introduce: EN 12353:2006 [IDT]

    Replaces: PN-EN 12353:2002

77. PN-EN 12791:2005
    Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirement (phase 2/step 2) (oryg.)

    Introduce: EN 12791:2005 [IDT]

78. PN-EN 13060:2005 - REPLACED BY PN-EN 13060+A1:2009
    Small steam sterilizers (oryg.)

    Expiry date: 2010-03-31

    Introduce: EN 13060:2004 [IDT]

    Replaces: PN-Z-04600:1971, PN-Z-04600:1971/Az1:2002

79. PN-EN 13060+A1:2009 - REPLACED BY PN-EN 13060+A1:2010
    Small steam sterilizers (oryg.)

    Introduce: EN 13060:2004+A1:2009 [IDT]

    Replaces: PN-EN 13060:2005

80. PN-EN 13060+A1:2010 - REPLACED BY PN-EN 13060+A2:2010
    Small steam sterilizers

    Introduce: EN 13060:2004+A1:2009 [IDT]

    Replaces: PN-EN 13060+A1:2009

81. PN-EN 13060+A2:2010
    Small steam sterilizers (oryg.)

    Introduce: EN 13060:2004+A2:2010 [IDT]

    Replaces: PN-EN 13060+A1:2010

82. PN-EN 13624:2004 - REPLACED BY PN-EN 13624:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the medical area - Test method and requirements (phase 2, step 1) (oryg.)

    Introduce: EN 13624:2003 [IDT]

83. PN-EN 13624:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the medical area - Test method and requirements (phase 2, step 1)

    Introduce: EN 13624:2003 [IDT]

    Replaces: PN-EN 13624:2004

84. PN-EN 13697:2002
    Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2/step2)

    Introduce: EN 13697:2001 [IDT]

    Replaces: PN-EN 13697:2002

85. PN-EN 13697:2002/Ap1:2003
    Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2/step2)
86. PN-EN 13727:2004 - REPLACED BY PN-EN 13727:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants for instruments used in the medical area - Test method and requirements (phase 2, step 1) (oryg.)

    Introduce: EN 13727:2003 [IDT]

87. PN-EN 13727:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants for instruments used in the medical area - Test method and requirements (phase 2, step 1)

    Introduce: EN 13727:2003 [IDT]

    Replaces: PN-EN 13727:2004

88. PN-EN 13824:2005 - REPLACED BY PN-EN 13824:2006
    Sterilization of medical devices - Aseptic processing of liquid medical devices - Requirements (oryg.)

    Introduce: EN 13824:2004 [IDT]

89. PN-EN 13824:2006
    Sterilization of medical devices - Aseptic processing of liquid medical devices - Requirements

    Introduce: EN 13824:2004 [IDT]

    Replaces: PN-EN 13824:2005

90. PN-EN 14180:2004 - REPLACED BY PN-EN 14180:2005
    Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing (oryg.)

    Introduce: EN 14180:2003 [IDT]

91. PN-EN 14180:2005 - REPLACED BY PN-EN 14180+A1:2009
    Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing

    Expiry date: 2010-03-31

    Introduce: EN 14180:2003 [IDT]

    Replaces: PN-EN 14180:2004

92. PN-EN 14180+A1:2009 - REPLACED BY PN-EN 14180+A2:2009
    Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing (oryg.)

    Introduce: EN 14180:2003+A1:2009 [IDT]

    Replaces: PN-EN 14180:2005

93. PN-EN 14180+A2:2009
    Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing (oryg.)

    Introduce: EN 14180:2003+A2:2009 [IDT]

    Replaces: PN-EN 14180+A1:2009

94. PN-EN 14204:2005 - REPLACED BY PN-EN 14204:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) (oryg.)

    Expiry date: 2006-02-16

    Introduce: EN 14204:2004 [IDT]

95. PN-EN 14347:2005
    Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1, step 1) (oryg.)

    Introduce: EN 14347:2005 [IDT]

96. PN-EN 14348:2005 - REPLACED BY PN-EN 14348:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2, step 1) (oryg.)

    Introduce: EN 14348:2005 [IDT]

97. PN-EN 14348:2006
    Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2, step 1)

    Introduce: EN 14348:2005 [IDT]

    Replaces: PN-EN 14348:2005

98. PN-EN 14349:2005 - REPLACED BY PN-EN 14349:2006
    Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bacterial activity of chemical disinfectants and antiseptics used in veterinary field on non-porous surfaces without mechanical action - Test method and requirements (phase 2, step 2) (oryg.)

    Expiry date: 2006-02-16

    Introduce: EN 14349:2004 [IDT]

99. PN-EN 14349:2008
    Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on non-porous surfaces without mechanical action - Test method and requirements (phase 2, step 2) (oryg.)

    Introduce: EN 14349:2007 [IDT]

    Replaces: PN-EN 14349:2006

100. PN-EN 14476:2005 - REPLACED BY PN-EN 14476:2007
     Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1) (oryg.)

     Introduce: EN 14476:2005 [IDT]

101. PN-EN 14476:2007 - REPLACED BY PN-EN 14476+A1:2007
     Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1) (oryg.)

     Introduce: EN 14476:2005+A1:2006 [IDT]

     Replaces: PN-EN 14476:2005

102. PN-EN 14476+A1:2007
     Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1)

     Introduce: EN 14476:2005+A1:2006 [IDT]

     Replaces: PN-EN 14476:2007

103. PN-EN 14561:2006 - REPLACED BY PN-EN 14561:2008
     Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2) (oryg.)

     Introduce: EN 14561:2006 [IDT]

104. PN-EN 14561:2008
     Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)

     Introduce: EN 14561:2006 [IDT]

     Replaces: PN-EN 14561:2006

105. PN-EN 14562:2006 - REPLACED BY PN-EN 14562:2008
     Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2) (oryg.)

     Introduce: EN 14562:2006 [IDT]

106. PN-EN 14562:2008
     Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)

     Introduce: EN 14562:2006 [IDT]

     Replaces: PN-EN 14562:2006

107. PN-EN 14563:2008
     Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area - Test method and requirements (phase 2, step 2) (oryg.)

     Introduce: EN 14563:2008 [IDT]

108. PN-EN 14885:2007 - REPLACED BY PN-EN 14885:2008
     Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics (oryg.)

     Introduce: EN 14885:2006 [IDT]

109. PN-EN 14885:2008
     Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics

     Introduce: EN 14885:2006 [IDT]

     Replaces: PN-EN 14885:2007

110. PN-EN 15424:2007 - REPLACED BY PN-EN 15424:2009
     Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (oryg.)

     Introduce: EN 15424:2007 [IDT]

111. PN-EN 15424:2009
     Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices

     Introduce: EN 15424:2007 [IDT]

     Replaces: PN-EN 15424:2007

112. PN-EN 61010-2-040:2006 - REPLACED BY PN-EN 61010-2-040:2007
     Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (oryg.)

     Introduce: EN 61010-2-040:2005 [IDT]

     Replaces: PN-EN 61010-2-041:2001, PN-EN 61010-2-042:2000, PN-EN 61010-2-043:2000, PN-EN 61010-2-045:2002

113. PN-EN 61010-2-040:2007
     Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

     Introduce: EN 61010-2-040:2005 [IDT]

     Replaces: PN-EN 61010-2-040:2006

114. PN-EN 61010-2-042:2000 - REPLACED BY PN-EN 61010-2-040:2006
     Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes (IEC 61010-2-042:1997)

     Expiry date: 2008-06-01

     Introduce: EN 61010-2-042:1997 [IDT]

115. PN-EN 61010-2-043:2000 - REPLACED BY PN-EN 61010-2-040:2006
     Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory processes (IEC 61010-2-043:1997)

     Expiry date: 2008-06-01

     Introduce: EN 61010-2-043:1997 [IDT]

116. PN-EN 61010-2-045:2002 - REPLACED BY PN-EN 61010-2-040:2006
     Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields

     Expiry date: 2008-06-01

     Introduce: EN 61010-2-045:2000 [IDT]

     Replaces: PN-EN 61010-2-045:2002

117. PN-EN 61010-2-045:2002 - REPLACED BY PN-EN 61010-2-045:2002
     Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields (oryg.)

     Introduce: EN 61010-2-045:2000 [IDT]

118. PN-EN ISO 11135-1:2007 - REPLACED BY PN-EN ISO 11135-1:2009
     Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) (oryg.)

     Introduce: EN ISO 11135-1:2007 [IDT]

     Replaces: PN-EN 550:2002

119. PN-EN ISO 11135-1:2009
     Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007)

     Introduce: EN ISO 11135-1:2007 [IDT]

     Replaces: PN-EN ISO 11135-1:2007

120. PN-EN ISO 11137-1:2006 - REPLACED BY PN-EN ISO 11137-1:2007
     Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006) (oryg.)

     Introduce: EN ISO 11137-1:2006 [IDT]

     Replaces: PN-EN 552:1999, PN-EN 552:1999/A1:2000, PN-EN 552:1999/A2:2002, PN-EN 552:1999/Ap1:2001

121. PN-EN ISO 11137-1:2007
     Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006)

     Introduce: EN ISO 11137-1:2006 [IDT]

     Replaces: PN-EN ISO 11137-1:2006

122. PN-EN ISO 11137-2:2006 - REPLACED BY PN-EN ISO 11137-2:2007
     Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2006) (oryg.)

     Introduce: EN ISO 11137-2:2006 [IDT]

     Replaces: PN-EN 552:1999, PN-EN 552:1999/A1:2000, PN-EN 552:1999/A2:2002, PN-EN 552:1999/Ap1:2001

123. PN-EN ISO 11137-2:2007 - REPLACED BY PN-EN ISO 11137-2:2007
     Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2006, corrected version 2006-08-01) (oryg.)

     Introduce: EN ISO 11137-2:2007 [IDT]

     Replaces: PN-EN ISO 11137-2:2006

124. PN-EN ISO 11137-2:2007
     Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2006, corrected version 2006-08-01)

     Introduce: EN ISO 11137-2:2007 [IDT]

     Replaces: PN-EN ISO 11137-2:2007

125. PN-EN ISO 11137-2:2007/AC:2009
     Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2006/Cor 1:2009)

     Introduce: EN ISO 11137-2:2007/AC:2009 [IDT]

126. PN-EN ISO 11137-3:2006 - REPLACED BY PN-EN ISO 11137-3:2007
     Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects (ISO 11137-3:2006) (oryg.)

     Introduce: EN ISO 11137-3:2006 [IDT]

     Replaces: PN-EN 552:1999, PN-EN 552:1999/A1:2000, PN-EN 552:1999/A2:2002, PN-EN 552:1999/Ap1:2001

127. PN-EN ISO 11137-3:2007
     Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects (ISO 11137-3:2006)

     Introduce: EN ISO 11137-3:2006 [IDT]

     Replaces: PN-EN ISO 11137-3:2006

128. PN-EN ISO 11138-1:2006 - REPLACED BY PN-EN ISO 11138-1:2008
     Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2006) (oryg.)

     Introduce: EN ISO 11138-1:2006 [IDT]

     Replaces: PN-EN 866-1:2000

129. PN-EN ISO 11138-1:2008
     Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2006)

     Introduce: EN ISO 11138-1:2006 [IDT]

     Replaces: PN-EN ISO 11138-1:2006

130. PN-EN ISO 11138-2:2006 - REPLACED BY PN-EN ISO 11138-2:2008
     Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes (ISO 11138-2:2006) (oryg.)

     Introduce: EN ISO 11138-2:2006 [IDT]

     Replaces: PN-EN 866-2:2000, PN-EN 866-8:2002

131. PN-EN ISO 11138-2:2008 - REPLACED BY PN-EN ISO 11138-2:2009
     Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes (ISO 11138-2:2006)

     Expiry date: 2010-03-31

     Introduce: EN ISO 11138-2:2006 [IDT]

     Replaces: PN-EN ISO 11138-2:2006

132. PN-EN ISO 11138-2:2009
     Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes (ISO 11138-2:2006) (oryg.)

     Introduce: EN ISO 11138-2:2009 [IDT]

     Replaces: PN-EN ISO 11138-2:2008

133. PN-EN ISO 11138-3:2006 - REPLACED BY PN-EN ISO 11138-3:2008
     Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes (ISO 11138-3:2006) (oryg.)

     Introduce: EN ISO 11138-3:2006 [IDT]

     Replaces: PN-EN 866-3:2000, PN-EN 866-7:2002

134. PN-EN ISO 11138-3:2008 - REPLACED BY PN-EN ISO 11138-3:2009
     Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes (ISO 11138-3:2006)

     Expiry date: 2010-03-31

     Introduce: EN ISO 11138-3:2006 [IDT]

     Replaces: PN-EN ISO 11138-3:2006

135. PN-EN ISO 11138-3:2009
     Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes (ISO 11138-3:2006) (oryg.)

     Introduce: EN ISO 11138-3:2009 [IDT]

     Replaces: PN-EN ISO 11138-3:2008

136. PN-EN ISO 11138-4:2006 - REPLACED BY PN-EN ISO 11138-4:2008
     Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization processes (ISO 11138-4:2006) (oryg.)

     Introduce: EN ISO 11138-4:2006 [IDT]

     Replaces: PN-EN 866-6:2002

137. PN-EN ISO 11138-4:2008
     Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization processes (ISO 11138-4:2006)

     Introduce: EN ISO 11138-4:2006 [IDT]

     Replaces: PN-EN ISO 11138-4:2006

138. PN-EN ISO 11138-5:2006 - REPLACED BY PN-EN ISO 11138-5:2008
     Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2006) (oryg.)

     Introduce: EN ISO 11138-5:2006 [IDT]

     Replaces: PN-EN 866-5:2002

139. PN-EN ISO 11138-5:2008
     Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2006)

     Introduce: EN ISO 11138-5:2006 [IDT]

     Replaces: PN-EN ISO 11138-5:2006

140. PN-EN ISO 11140-1:2005 - REPLACED BY PN-EN ISO 11140-1:2006
     Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2005) (oryg.)

     Introduce: EN ISO 11140-1:2005 [IDT]

141. PN-EN ISO 11140-1:2006 - REPLACED BY PN-EN ISO 11140-1:2009
     Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2005)

     Expiry date: 2010-03-31

     Introduce: EN ISO 11140-1:2005 [IDT]

     Replaces: PN-EN ISO 11140-1:2005, PN-EN 867-1:2001, PN-EN 867-2:2001

142. PN-EN ISO 11140-1:2009
     Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2005) (oryg.)

     Introduce: EN ISO 11140-1:2009 [IDT]

     Replaces: PN-EN ISO 11140-1:2006

143. PN-EN ISO 11140-3:2007 - REPLACED BY PN-EN ISO 11140-3:2009
     Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007) (oryg.)

     Introduce: EN ISO 11140-3:2007 [IDT]

     Replaces: PN-EN 867-3:2001

144. PN-EN ISO 11140-3:2009 - REPLACED BY PN-EN ISO 11140-3:2009
     Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007)

     Expiry date: 2010-03-31

     Introduce: EN ISO 11140-3:2007/AC:2008 [IDT], EN ISO 11140-3:2007 [IDT], ISO 11140-3:2007/AC1:2007 [IDT]

     Replaces: PN-EN ISO 11140-3:2007

145. PN-EN ISO 11140-3:2009
     Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007, including Cor 1:2007) (oryg.)

     Introduce: EN ISO 11140-3:2009 [IDT]

     Replaces: PN-EN ISO 11140-3:2009

146. PN-EN ISO 11140-4:2007 - REPLACED BY PN-EN ISO 11140-4:2009
     Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) (oryg.)

     Introduce: EN ISO 11140-4:2007 [IDT]

     Replaces: PN-EN 867-4:2003

147. PN-EN ISO 11140-4:2009
     Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007)

     Introduce: EN ISO 11140-4:2007 [IDT]

     Replaces: PN-EN ISO 11140-4:2007

148. PN-EN ISO 11607-1:2006 - REPLACED BY PN-EN ISO 11607-1:2007
     Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006) (oryg.)

     Introduce: EN ISO 11607-1:2006 [IDT]

     Replaces: PN-EN 868-1:1999

149. PN-EN ISO 11607-1:2007 - REPLACED BY PN-EN ISO 11607-1:2009
     Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006)

     Expiry date: 2010-03-31

     Introduce: EN ISO 11607-1:2006 [IDT]

     Replaces: PN-EN ISO 11607-1:2006

150. PN-EN ISO 11607-1:2009
     Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006) (oryg.)

     Introduce: EN ISO 11607-1:2009 [IDT]

     Replaces: PN-EN ISO 11607-1:2007

151. PN-EN ISO 11607-2:2006 - REPLACED BY PN-EN ISO 11607-2:2008
     Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006) (oryg.)

     Introduce: EN ISO 11607-2:2006 [IDT]

152. PN-EN ISO 11607-2:2008
     Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006)

     Introduce: EN ISO 11607-2:2006 [IDT]

     Replaces: PN-EN ISO 11607-2:2006

153. PN-EN ISO 11737-1:2006 - REPLACED BY PN-EN ISO 11737-1:2007
     Sterilization of medical devices - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2006) (oryg.)

     Introduce: EN ISO 11737-1:2006 [IDT]

     Replaces: PN-EN 1174-1:1999, PN-EN 1174-2:1999, PN-EN 1174-3:1999

154. PN-EN ISO 11737-1:2007
     Sterilization of medical devices - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2006)

     Introduce: EN ISO 11737-1:2006 [IDT]

     Replaces: PN-EN ISO 11737-1:2006

155. PN-EN ISO 11737-1:2007/AC:2009
     Sterilization of medical devices - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2006/Cor 1:2007)

     Introduce: EN ISO 11737-1:2006/AC:2009 [IDT]

156. PN-EN ISO 11737-2:2002 - REPLACED BY PN-EN ISO 11737-2:2010
     Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process (ISO 11737-2:1998)

     Introduce: EN ISO 11737-2:2000 [IDT]

     Replaces: PN-EN ISO 11737-2:2002

157. PN-EN ISO 11737-2:2002 - REPLACED BY PN-EN ISO 11737-2:2002
     Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process (ISO 11737-2:1998) (oryg.)

     Introduce: EN ISO 11737-2:2000 [IDT]

158. PN-EN ISO 11737-2:2010
     Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) (oryg.)

     Introduce: EN ISO 11737-2:2009 [IDT]

     Replaces: PN-EN ISO 11737-2:2002

159. PN-EN ISO 14160:2002
     Sterilization of single-use medical devices incorporating materials of animal origin - Validation and routine control of sterilization by liquid chemical sterilants (ISO 14160:1998)

     Introduce: EN ISO 14160:1998 [IDT]

160. PN-EN ISO 14161:2002 - REPLACED BY PN-EN ISO 14161:2004
     Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2000) (oryg.)

     Introduce: EN ISO 14161:2000 [IDT]

161. PN-EN ISO 14161:2004 - REPLACED BY PN-EN ISO 14161:2010
     Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2000)

     Introduce: EN ISO 14161:2000 [IDT]

     Replaces: PN-EN ISO 14161:2002

162. PN-EN ISO 14161:2010
     Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) (oryg.)

     Introduce: EN ISO 14161:2009 [IDT]

     Replaces: PN-EN ISO 14161:2004

163. PN-EN ISO 14937:2002 - REPLACED BY PN-EN ISO 14937:2004
     Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2000) (oryg.)

     Introduce: EN ISO 14937:2000 [IDT]

164. PN-EN ISO 14937:2004 - REPLACED BY PN-EN ISO 14937:2010
     Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2000)

     Introduce: EN ISO 14937:2000/AC:2003 [IDT], EN ISO 14937:2000 [IDT]

     Replaces: PN-EN ISO 14937:2002

165. PN-EN ISO 14937:2010
     Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) (oryg.)

     Introduce: EN ISO 14937:2009 [IDT]

     Replaces: PN-EN ISO 14937:2004, PN-EN ISO 14937:2004/AC2:2005

166. PN-EN ISO 14937:2004/AC2:2005 - REPLACED BY PN-EN ISO 14937:2010
     Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2000) (oryg.)

     Introduce: EN ISO 14937:2000/AC:2005 [IDT]

167. PN-EN ISO 15882:2004 - REPLACED BY PN-EN ISO 15882:2008
     Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2003)

     Introduce: EN ISO 15882:2003 [IDT]

168. PN-EN ISO 15882:2008 - REPLACED BY PN-EN ISO 15882:2009
     Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2008) (oryg.)

     Introduce: EN ISO 15882:2008 [IDT]

     Replaces: PN-EN ISO 15882:2004

169. PN-EN ISO 15882:2009
     Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2008)

     Introduce: EN ISO 15882:2008 [IDT]

     Replaces: PN-EN ISO 15882:2008

170. PN-EN ISO 15883-1:2006 - REPLACED BY PN-EN ISO 15883-1:2008
     Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) (oryg.)

     Introduce: EN ISO 15883-1:2006 [IDT]

171. PN-EN ISO 15883-1:2008 - REPLACED BY PN-EN ISO 15883-1:2009
     Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006)

     Expiry date: 2010-03-31

     Introduce: EN ISO 15883-1:2006 [IDT]

     Replaces: PN-EN ISO 15883-1:2006

172. PN-EN ISO 15883-1:2009
     Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) (oryg.)

     Introduce: EN ISO 15883-1:2009 [IDT]

     Replaces: PN-EN ISO 15883-1:2008

173. PN-EN ISO 15883-2:2006 - REPLACED BY PN-EN ISO 15883-2:2008
     Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006) (oryg.)

     Introduce: EN ISO 15883-2:2006 [IDT]

174. PN-EN ISO 15883-2:2008 - REPLACED BY PN-EN ISO 15883-2:2009
     Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006)

     Expiry date: 2010-03-31

     Introduce: EN ISO 15883-2:2006 [IDT]

     Replaces: PN-EN ISO 15883-2:2006

175. PN-EN ISO 15883-2:2009
     Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006) (oryg.)

     Introduce: EN ISO 15883-2:2009 [IDT]

     Replaces: PN-EN ISO 15883-2:2008

176. PN-EN ISO 15883-3:2006 - REPLACED BY PN-EN ISO 15883-3:2008
     Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO 15883-3:2006) (oryg.)

     Introduce: EN ISO 15883-3:2006 [IDT]

177. PN-EN ISO 15883-3:2008 - REPLACED BY PN-EN ISO 15883-3:2009
     Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO 15883-3:2006)

     Expiry date: 2010-03-31

     Introduce: EN ISO 15883-3:2006 [IDT]

     Replaces: PN-EN ISO 15883-3:2006

178. PN-EN ISO 15883-3:2009
     Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO 15883-3:2006) (oryg.)

     Introduce: EN ISO 15883-3:2009 [IDT]

     Replaces: PN-EN ISO 15883-3:2008

179. PN-EN ISO 15883-4:2008 - REPLACED BY PN-EN ISO 15883-4:2009
     Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO 15883-4:2008) (oryg.)

     Expiry date: 2010-03-31

     Introduce: EN ISO 15883-4:2008 [IDT]

180. PN-EN ISO 15883-4:2009 - REPLACED BY PN-EN ISO 15883-4:2010
     Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO 15883-4:2008) (oryg.)

     Introduce: EN ISO 15883-4:2009 [IDT]

     Replaces: PN-EN ISO 15883-4:2008

181. PN-EN ISO 15883-4:2010
     Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO 15883-4:2008)

     Introduce: EN ISO 15883-4:2009 [IDT]

     Replaces: PN-EN ISO 15883-4:2009

182. PN-EN ISO 17664:2004 - REPLACED BY PN-EN ISO 17664:2005
     Sterilization of medical devices - Information to be provided by the manufacturer for the processing of resterilizable medical devices (oryg.)

     Introduce: EN ISO 17664:2004 [IDT]

183. PN-EN ISO 17664:2005
     Sterilization of medical devices - Information to be provided by the manufacturer for the processing of resterilizable medical devices

     Introduce: EN ISO 17664:2004 [IDT]

     Replaces: PN-EN ISO 17664:2004

184. PN-EN ISO 17665-1:2007 - REPLACED BY PN-EN ISO 17665-1:2008
     Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) (oryg.)

     Introduce: EN ISO 17665-1:2006 [IDT]

     Replaces: PN-EN 554:1999

185. PN-EN ISO 17665-1:2008
     Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)

     Introduce: EN ISO 17665-1:2006 [IDT]

     Replaces: PN-EN ISO 17665-1:2007

186. PN-EN ISO 18472:2006 - REPLACED BY PN-EN ISO 18472:2009
     Sterilization of health care products - Biological and chemical indicators - Test equipment (ISO 18472:2006) (oryg.)

     Introduce: EN ISO 18472:2006 [IDT]

187. PN-EN ISO 18472:2009
     Sterilization of health care products - Biological and chemical indicators - Test equipment (ISO 18472:2006)

     Introduce: EN ISO 18472:2006 [IDT]

     Replaces: PN-EN ISO 18472:2006

188. PN-ISO 11140-5:2010
     Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for Bowie and Dick-type air removal tests

     Introduce: ISO 11140-5:2007 [IDT]

189. PN-E-77014:1962 - REPLACED BY PN-Z-70101:1976
     
190. PN-T-06517-3-041:2003
     Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-041: Conformity verification report

     Introduce: IEC/TR 61010-3-041:1999 [IDT]

191. PN-Z-04600:1971 - REPLACED BY PN-EN 13060:2005
     Medical equipment -- Methods for testing technical efficiency of steam sterilizers

     Expiry date: 2005-03-15

192. PN-Z-04600:1971/Az1:2002 - REPLACED BY PN-EN 13060:2005
     Medical equipment -- Methods for testing technical efficiency of steam sterilizers

     Expiry date: 2005-03-15

193. PN-Z-70101:1976
     Medical equipment -- Dry heat air sterilizers -- Common requirements and tests

     Replaces: PN-E-77014:1962

All content-related comments concerning electronic version of Catalogue of Polish Standards please address directly to Sales Department: wdiinfo@pkn.pl.

Sale of Polish Standards and other publications: Sales Department, tel. + 48 22 556 77 77, fax. + 48 22 556 77 87, e-mail: wdisekr@pkn.pl,
http://www.pkn.pl/zamowienie
https://sklep.pkn.pl

back